Making Use of Crackle Finish

Before, no one wanted to have old things but times have changed since then. With new things, some simple painting will make a difference. You can buy crackle paint at any local hardware store. There are plenty of individuals who have resorted to this kind of painting technique.

Here, you have something that really works.

You can follow these simple steps to make a new wall that will look old on purpose. All you will need here are latex satin wall paint, crackle medium, paint brush for latex paint, roller and roller cover, drop cloths, and masking tape.

Put a base coat of latex paint and then leave the walls to dry for at least 24 hours. When it comes to the walls, for another color to show through the crackle, you need a satin finish for the base coat. Craft stores sell crackle finish in small pint containers, and paint stores sell it in larger quart or gallon containers.

Depending on the project you are working on, you can apply the crackle finish at one time. Never apply the crackle finish at the same time when working on walls. You have the masking tape to protect some areas that you want to leave alone. Using a brush or roller, depending on the size of your project, apply the crackle.

For painting walls, cut in the edges and roll on the crackle finish then allow the crackle finish to dry. It is important that you let the paint dry for about an hour. Only apply the top coat of paint when the crackle finish has dried. If you wait too long you may need to reapply the finish. It is possible for the latex satin paint top coat to be applied using two methods.

The surface of the walls can have fine cracks or large ones and the only difference between them is the utilization of a natural sea sponge or a regular paint brush. When it comes to this kind of painting method, walls are best done with a brush. Painting your walls with crackle can be a tedious endeavor.

Paint the wall in sections with your paint brush. Apply the crackle and let it dry then you need to consider applying only one coat of paint so as not to damage the finish.

When it was our time to work on our wall, we applied the paint in long even strokes and worked it from top to bottom. Our strategy was to paint the walls area by area. You can say that we were no experts in this endeavor. Never forget to skim through the manufacturer's recommendations in this case.

We hope you like our article on custom paintings of your home and the broader topic of paintings.Browse more advice and paintings news at painted portrait service.