Infrared Heater Review

Long wave infrared heating is also an electric heating elements. The principle of its work seriously deviates from the others. During its work, there is an emission of thermal energy due to the emanation infrared electromagnetic waves. So first it heats the objects on which it is directed (floor, furniture, walls). The air warms in the premise of their hand. In such a system degrees, the soil is always slightly warmer air. Another advantage is that all surfaces in the area of heat infrared radiant heating. The area of their heat emission is much greater, then the body of the oil cooler or coil. Thus, the working time decreases water heater, which obviously affects the energy consumption. Therefore, infrared heaters are most economical.

Infrared heaters are made of square panels that are mounted in the ceiling with a help of special equipment. Each model has its own power and is calculated for premises with a minimum ceiling height required. The heat of infrared heating comes across any surface on which it is directed, it is recommended to mount some distance from the head person. The infrared heating 800Wt must be mounted on the minimum distance of 0.7 meters, which is enough for a physical life. Heater 2-4kWt should be mounted on the distance of 1.5-2.5 meters. Of course, these heaters can be used in large workshops and other industrial buildings. With the aid of infrared heating, you can create heat in your workplace in the office or on the sofa where you like to relax, without heating the same basis.

New technologies in the production of infrared heaters use elements carbon (carbon) in heating elements. The advantage of carbon infrared heaters is their economy, which is acquired as a result of rapid system start working.

Infrared heaters are more expensive. Minimum power panel heating is 300-600Wt, but it is not sufficient to heat the premise, you'll need to buy parts of some.

Selecting a heater define what the objectives are to serve. If you want to warm your feet under the table, then you will need heater fan. This area is inaccessible to the infrared heaters. When the heater fan same time drying the air and disperse the dust, unlike infrared heating can sometimes substitute the word "hot" system. If the heater should quickly heat the whole flat, you can think of oil coolers. But Electroconvector are safer, although slightly more expensive. They can be mounted under the window because of the rules of heating.

For more specific information about comfort zone vs edenpure infared heaters, try visiting infrared heaters .