You may be asking yourself the question: "Is all paint pretreatment and metal cleaning equipment the same?" The answer is a resounding: "Not on your life!"
The next generation of pretreatment and cleaning products for metal parts is completely different than anything you've experienced. In this article, we'll explain how The CPR System's spray wand cleaning method with recycling leaves past cleaning processes in the dust!
Unique Wash Water Recycling:
The CPR System's metal cleaning equipment has the advantage of being a closed-loop, environmentally-friendly, cleaning method meaning that wash water and chemical cleaner / phosphate is recycled instead of having to be discharge of it after each wash. Thus, any organization is now able to conserve water, eliminate EPA permitting and monitoring and reclaim their chemical cleaning all in the process of prepping their metal products before paint.
Reclaim Your Chemical Cleaner For Reuse:
The CPR System recycling equipment recycles at a rate of 20 Gallons a minute. Removing dirt, oils and suspended solids to a size of 20 micron or smaller the chemical cleaner and phosphate is left in the water and is ready for reuse. This eliminates about 80% of cost associated with chemical overhead compared to typical wash and dump methods.
Increased Paint Adhesion:
Have you had problems with poor paint adhesion? Do you find flaking and paint chipping in the corners of your metal parts due to poor metal pretreatment before paint. The CPR System eliminates a lot of the headaches associated with cleaning large metal products by using a spray wand cleaning method. This method is quick and efficient. Washing the metal products at pressures of 3,000 PSI the cleaner and phosphate clean corners and welding smut with ease all while leaving a thin phosphate coating behind for better paint adhesion.
Completely Prepped Paint Surface:
Metal doesn't typically "like" paint; therefore, it must be prepped before industrial paint such as that from Sherwin Williams, PPG Industrial or Valspar can be applied. Today's unique paint pretreatment methods can ensure a perfectly prepped surface on your metal parts.
Decreased Labor:
How many hours do your workers currently spend preparing your metal products? Chances are that when it needs to be done, it takes some time. That's another way the CPR System's cleaning method is superior to typical wash and dump methods.
14 Day No Flash Rust Guarantee:
No company that deals with metal parts wants to have to incur the costs associated with flash rusting. That's why today's models of phosphatizing equipment, such as that available through CPR Systems, are so thorough. After all, only the best will do for your and your organization. CPR System offers a 14 day no flash rust guarantee at 50% humidity. The phosphate coating in their chemical cleaner / phosphate Phosbite 101 helps fight corrosion and flash rusting.
Don't hesitate another day - look into the next generation of phosphatizing equipment right now. You'll never regret taking the step.
For more information, visit CPRSystemsOnline.
CPR Systems Online is the leader in high pressure spray wand phosphatising with
waste water recycling for metal & paint pre-treatment. For more information, visit
CPRSystemsOnline.com
Author RSS Views:
Print this article
Ask about this article